For any pieces of hardware directly related to Speeduino (ie Boards, components etc)
AyobamiFakunle wrote:
Tue Nov 07, 2017 5:21 pm
Could you stock allegro AT667 hall sensor?
Not to side-track the thread; but if you are wanting a crank/cam sensor, the ATS617 is optimized for that. The ATS667 is optimized for transmission speed sensing. Bigger numbers mean different, and not necessarily newer or better for a particular use, with different functions, outputs, etc. ;) More comments here.

turboedge wrote:
Tue Nov 07, 2017 7:07 pm
Thanks for the info David!

The suppliers I use do not stock the ATS617, but they do have the ATS616 which appears to be very similar, and they are cheaper than the 667. $8 or $7 for 2+.

Thanks, Weaver

Many thanks David
I read the thread AT616 it is. Want to have everything I need to do it once, distance is not my friend
Problems with noisy tps

there is a software filter setting - under tools-&[…]

Thank you dazq and PSIG, very helpful comments. I[…]

hints & kinks

the speeduino board wasn't going to get me t[…]

Problems loosing sync

Note that some VR conditioner circuits and chips d[…]

Still can't find what you're looking for?