Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any discussion not specifically related to your project
User avatar
Yes, the fundamentals are the same basis, and it only becomes fuzzy on the manipulation and application towards goals. E.g., Speeduino could apply MAF principles with or instead of MAP, if tuners, end-users and coders demanded that. On that leg, they generally don't as SD typically has an edge for performance and tuning manipulations, whereas the use of MAF by the OEMs is for different goals (there we go again) than most aftermarket users. Requirements, feature balances and opinions will vary, and we each have them. ;)

Take a look at this: https://speeduino.com/forum/[…]

There is information on driving high voltage injec[…]

Ok, I got the car back together and have been test[…]

This is same sensor and engine bay as mine. But I […]

Still can't find what you're looking for?