Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Help with building your Speeduino, installing it, getting it to run etc.
User avatar
By zoidberg
#44720
My TPS is really noisy, i have to set the dot threshold for acceleration enrichment to 80 not to have enrichment events every few seconds.
The noise spikes are really short but high.
Is there a possibility to filter this somehow?
Is it possible to filter this in software?
A minimum duration of tps changes would be nice, if its under 50us ignore it or something like that.

It doesn not only mess with my acceleration enrichment but also my deceleration fuel cut, which sucks even more because i want that feature, as this gives me more efficiency, especially down hills.
Reset_Control

Very good to all, I am running a speeduino v0.4.3c[…]

STM32 as well i believe. Is there a reason you wa[…]

In my case the clamp is behind the fuse so the[…]

Good afternoon, test the vvt map leaving off "[…]

Still can't find what you're looking for?