Help with building your Speeduino, installing it, getting it to run etc.
By Paul
#43958
Hello, My tps has 2 sensors on it one 3 pin and a switch to activate it. I've tried hooking up only the 3 pin to my Speeduino without any readings. I also tried feeding the switch 5v to try to get something out of the tps. I tried reversing the polarity and still nothing. Do you guys have any ideas on what I could try to get this thing to work? The engine is in a Nissan 240sx with a wiring specialties harness.
By Paul
#43959
Here are some pictures
Attachments
IMG_20200627_171823.jpg
IMG_20200627_171823.jpg (4.93 MiB) Viewed 201 times
IMG_20200627_171648.jpg
IMG_20200627_171648.jpg (5.04 MiB) Viewed 201 times
IMG_20200627_171619.jpg
IMG_20200627_171619.jpg (4.59 MiB) Viewed 201 times
Mazda FS-02 German streetlegal

What GPIO expander? And I gave you the answer. T[…]

What is that zener diode going to do?

So like, measuring static resistance of the coil[…]

Quadspark BIP373 specs?

Try whit trigger filter off, see if it makes a dif[…]

Still can't find what you're looking for?