Help with building your Speeduino, installing it, getting it to run etc.
By subzero
#42914
Need new wideband sensor
Clean house p wiring testing idle
IMG_20200516_121954.jpg
IMG_20200516_121954.jpg (6.34 MiB) Viewed 4146 times
Attachments
IMG_20200516_122051.jpg
IMG_20200516_122051.jpg (4.51 MiB) Viewed 4146 times
By subzero
#42978
Today after all complication i restarted the tune
Noe idle speed is much better have better responce
And acceleratin respond better with lamda fluctuate beetween 14.3 on idle and 14.7 on cruise
My injector dead time wotk ok at 1.3 ms i have same afr at the same rpm beetween 2 and 4 squirts
I think i go for 4 squirts
By subzero
#43047
used original ecu to control idle
now i have 1000 rpm stable idle
i found that original tps change the advance map on idle open throttle
Attachments
Screenshot_20200523_180444.png
Screenshot_20200523_180444.png (192.7 KiB) Viewed 4062 times
Screenshot_20200523_180631.png
Screenshot_20200523_180631.png (87.59 KiB) Viewed 4062 times
Screenshot_20200523_180656.png
Screenshot_20200523_180656.png (147.78 KiB) Viewed 4062 times
Screenshot_20200523_180745.png
Screenshot_20200523_180745.png (126.21 KiB) Viewed 4062 times
speeduino23_180310.png
speeduino23_180310.png (176.05 KiB) Viewed 4062 times
By subzero
#43181
Backordered lsu 4.9 and 4 440cc greengiant oem injectors from china
Someone tested the china oem injectors?
Is good? My previous injectors 3 are ok after cleaning the fourth one has 12 percent less flow @3 bar
I think is beter to try china oem.4 new bosch costs 70 euro each
By rallikuski
#43206
I think there is a reason why OEM bosch costs 70$ for each... What i read and searched any china injectors seems "not so good quality"...
By subzero
#43251
ordered 4 original bosch injectors 440 cc
o2 sensor is on the way
ordered automotive tube various sizes
plus ordered scg ecu v1 pcb and parts to move on coolest 51 pin ecu box
By subzero
#43382
New arrival bosch green giants injectors 4 new
Original
IMG_20200604_185936.jpg
IMG_20200604_185936.jpg (3.04 MiB) Viewed 3919 times
Attachments
IMG_20200604_185931.jpg
IMG_20200604_185931.jpg (4.65 MiB) Viewed 3919 times
By subzero
#43484
Finally idle tuned well 14.2 to 14.5 afr
Dead time 1.2 ms
IMG_20200608_130358.jpg
IMG_20200608_130358.jpg (5.85 MiB) Viewed 3881 times
IMG_20200608_130356.jpg
IMG_20200608_130356.jpg (6.43 MiB) Viewed 3881 times
By subzero
#43585
today was great day driving the car on road and used auto tune
highload map and cruise is tuned
now i have to tune high rpm zone
  • 1
  • 3
  • 4
  • 5
  • 6
  • 7

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?