Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any questions you have before you begin buying, building and installing.
By alexands
Hello! I'm new here and this is my first post. I'm building a Gen 1 Hayabusa powered race car and am planning to run it with a Speeduino. Just wanted to see if anyone on here has any experience with this combination and any advice before I get started. Since it won't be in a morotcyle I'm not concerned about integrating it with factory wiring. I've searched the forums and haven't found much on this.

Thanks for any help!

Problem with fuel pump outlet

Did you mean pin 37! Thats pwm idle. If you int[…]

Dyno mode

Thats how it worked wen i worked with it in the OE[…]

LED's 5,6,7,8 on all the time

You need to calibrate the sensors. Else how with […]

Modified 3 cylinder

You could reassign the pins to unused pins.

Still can't find what you're looking for?