Page 3 of 3

Re: ignition pin 2 never goes high

PostPosted:Fri Mar 13, 2020 10:42 pm
by noisymime
Post your tune up, I'd be extremely surprised if there's anything in the firmware that is specifically blocking that pin though. Have you confirmed it works with a previous firmware version?

Re: ignition pin 2 never goes high

PostPosted:Sun Mar 15, 2020 9:27 pm
by NickZ
what your saying sound right if you have pin 38 assigned in your tune somewhere to something else, ive had the same problem too when i selected a ignition pin as a fan output by accident.
if it was a firmware problem it wouldn't matter what board it was, if pin 38 is assigned as i ignition output most boards would have a problem on the new firmware.

Maybe the TEST function isn't working for that pin.

Re: ignition pin 2 never goes high

PostPosted:Thu Mar 26, 2020 8:29 am
by zoidberg
i doubt its the test not working or having todo anything with configuration in tuner studio, as it works now. I remapped the pin to another and removed the pin and bridged it and now it works.
I can take a photo later and upload it.