[flagoworld]

I am putting together a 4cyl build with Speeduino. I have a ford EDIS system, but i don’t think that will work with Speeduino. I read that the coils are not logic level so i’d need a controller circuit, and also that the hall sensor is variable reluctance, so i’d need a signal conditioner.

Seems like i’d be better off just picking up a sensor and coil thats plug and play.

So, any recommendations?

[evo_lucian]

Hall sensor

https://www.digikey.com/products/en?mpart=GS100502&v=85

Coil pack
https://www.amazon.com/gp/aw/d/B00IMPB2 ... UTF8&psc=1

[flagoworld]

Thanks!

[PSIG]

Always good to have options, and here's a similar set of a bit different:

https://www.digikey.com/products/en?keywords=gs100701
is the same Hall sensor that @evo_lucian posted, but in a smaller package if space is an issue.

https://www.amazon.com/Ignition-Leganza ... ive&sr=1-2
is used on several makes including GM, so it uses common GM connector and LS-style coil wires. It also works without changing the IGN resistors. More info here.

Just other options depending on what's available to you locally or easily.

David