[turboimport95]

Like the title states curious if the ua4c board can run 24-2 at crank speed. I thought of slapping a speeduino on my k3 GSXR 1000 and wanted to be sure it would work before i do, Plan is to run parallel ecu config, simply running the coils and injectors. I also know the coils need drivers so ill swap those out, i got some k series coils laying around ill try out. thanks fellas speeduino is awesome. i will also use the one pulse i believe cam sensor wheel.

[jonbill]

check the wiki. I believe the answer is yes!
https://wiki.speeduino.com/en/decoders

[noisymime]

Yep 24-2 just works as a regular missing tooth setup, no problems there at all.