Anything not specifically related to the Speeduino hardware. Eg sensors, bluetooth, displays etc
#41943
choyr wrote: Wed Apr 08, 2020 1:24 pm i've read again the wiki, and not sure which hardwares support canbus and which version. is it only mega and std v1.0?
Yes use a mega MCU and the gpio std firmware.
The can is implemented using mcp2515 interface boards. Pin settings can be seen in the firmware, you can move cs and int pins if needed, but the hardware spi pins must be otherwise used.

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?