Anything not specifically related to the Speeduino hardware. Eg sensors, bluetooth, displays etc
By theonewithin
#40635
Pretty sure I am off in the above lol but there isn't a cam for a rotor engine so no need for a sensor on something that doesn't exist?
By LAV1000
#40636
60-2 on a 12000 rpm engine, does speeduino keep up whit it ?
I know the 60-2 is used on cars but there max rpm is much lower.
By Jcrotts
#40645
It fires once per revolution. It would have to since its points triggered. A rotary has th 4 "cycles" of a standard engine, but they all happen in one crank rotation, for each face of the rotor. That's why I referenced 2 stroke for timing. Maby that's not the best explanation ... What would be the theoretical limit on rpm? I was going to start at 8000 rev limit and creep up until it was just too troublesome to tune it to go faster?( ie. losing reference signal, misfire, injectors too slow)
By theonewithin
#40660
Limit depends on trigger wheel.

12-1 works up to 20k no issue.

Spin up a simulator and see how it goes if you are worried

nice first of all, i read all that crap months a[…]

I rewired a few grounds and tested the TPS and rel[…]

Thanks, car runs great now !!! Going to drift even[…]

sauver moteur v8

bonsoir je m appel jean marie et j habite en Franc[…]

Still can't find what you're looking for?