Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For discussion of Speeduino compatible boards designed / built by other members of the forum and for guidance around making such a board
User avatar
By bartekms43
#45482
pazi88 wrote:
Mon Sep 21, 2020 6:57 pm


Here are dead times:
https://drive.google.com/file/d/0B2EFGt ... p=drivesdk

Remember to use open time only mode.

Also I don't recommend using closed loop idle control with pwm valve, untill the issues in that are fixed. Open loop mode with idle advance curve works great.

BIG thanks for xls for deka 630cc. I spend 5h to do in closedloop, never works. So u have right for that. Can u tell me how u setup idle advanced curve for m50nv(values to start) ?
  • 1
  • 20
  • 21
  • 22
  • 23
  • 24

Here are wiring diagrams for three Ch(203 or 209) […]

Ok, you can't bypass the 5v regulator, it must hav[…]

Modified 3 cylinder

You should read up on how OEM go about shutting do[…]

Gauge output options? (0.4.4C Board)

At the moment only teensy natively supports th[…]

Still can't find what you're looking for?