For discussion of Speeduino compatible boards designed / built by other members of the forum and for guidance around making such a board
By joey120373
Birdickjp, it is pin compatible with the micro-squirt module, so it should plug in just fine.
However it is pretty much completely untested at this point.

I would like to at least test it on an engine before I release anything. Drop me a PM if you are really interested, I can send a spare PCB If you want to play with one.

@theonewithin Gpio Mini or dxcontroller I mean. […]

Hey all, Working perfectly now, I installed windo[…]

The voltage between negative coil terminal and gro[…]

you might have the coils not wired to ignition out[…]

Still can't find what you're looking for?