Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any add-on boards such as VR conditioners, optos and OEM interface boards
User avatar
By TonySandberg
#45325
Thought it was a good way to use the inputs / outputs if you do not use 4p IAC. Even if it is not possible to use the Arduino IAC pin 16,17, it is a good and smooth placement with 4 inputs 5 & 12v and gnd.
Attachments
1599857164584.jpg
1599857164584.jpg (41.65 KiB) Viewed 191 times
IMG_20200911_203051.jpg
IMG_20200911_203051.jpg (1.24 MiB) Viewed 191 times
1599850190772.jpg
1599850190772.jpg (28.32 KiB) Viewed 191 times
No synchronize

Maybe your VR conditioner has failed on one channe[…]

LED's 5,6,7,8 on all the time

Yeah, grounded Ardu-Stim to pin 10 on the 40 way I[…]

2CV 602 flat twin

Is it the 123 with the MAP feature? What engine ma[…]

PCB for Electromotive Tec3r

What do you think about this BM2LC120FJ-C for re[…]

Still can't find what you're looking for?