Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any add-on boards such as VR conditioners, optos and OEM interface boards
User avatar
By TonySandberg
#45325
Thought it was a good way to use the inputs / outputs if you do not use 4p IAC. Even if it is not possible to use the Arduino IAC pin 16,17, it is a good and smooth placement with 4 inputs 5 & 12v and gnd.
Attachments
1599857164584.jpg
1599857164584.jpg (41.65 KiB) Viewed 197 times
IMG_20200911_203051.jpg
IMG_20200911_203051.jpg (1.24 MiB) Viewed 197 times
1599850190772.jpg
1599850190772.jpg (28.32 KiB) Viewed 197 times
Gauge output options? (0.4.4C Board)

At the moment only teensy natively supports th[…]

Modified 3 cylinder

Why would you want to do that though??? As you on[…]

Check the github that has schematics. https://git[…]

i came here saying yes lets have a library, but th[…]

Still can't find what you're looking for?