[noisymime]

Happy to announce that the v0.3 boards are now available for ordering at the fancy new Speeduino online store: https://speeduino.com/shop/index.php

The v0.3 boards includes the following features:

• 4 injector channels
• 4 Ignition outputs
• Fully protected input channels for CLT, IAT, TPS and O2
• Optional VR conditioner mount on crank and cam inputs
• MAP sensor mount location
• 4 medium current spare outputs (Eg Fuel pump, thermo fan etc)
• All I/O through screw terminals on the board
• Optional EEPROM mount
• OLED breakout header

There are also a full (4 channel) and partial (2 channel) component kits available for purchase as well.
The BOM for this board is included in the Git repo, or can be downloaded directly from: https://github.com/noisymime/speeduino/ ... 3_bom.xlsx

Documentation for the board is available at: http://speeduino.com/wiki/index.php/V0.3

Feel free to reply to this post with any questions about the board and I'll get back to you ASAP.

[MasqueRacing]

josh, and for me shield, how do?

only are in sales now?

or for me have a discount?

Thanks in advance!

[noisymime]

josh, and for me shield, how do?

only are in sales now?

or for me have a discount?

Thanks in advance!

After you after a bare board or a full kit?

Honestly I'm making next to nothing on these, so there's not a lot I can do on discounts. This isn't (yet) a mass produced product, so a lot of it is manual. I'm working on reducing costs (The $100 price is still my target), but it's going to happen over time and the parts for the v0.3 board are locked in now.

[noisymime]

Jeepers, the component kits sold out a little faster than I anticipated! Still some bare boards available and I'll have more component kits available shortly.

[noisymime]

More complete documentation for the board is now available: http://speeduino.com/wiki/index.php/V0.3

[Junkers]

How far away are the next batch of component kits?

[noisymime]

I actually put the new batch of stock up earlier this week and they've gone already

I think I probably have enough parts to make up 1 more, I'll check tonight. Otherwise, the next lot are on order and should arrive in 4-5 days.

[Junkers]

That's a good thing.. right? Are the schematics available for the board? Wouldn't mind adding my own VR conditioner

[noisymime]

That's a good thing.. right? Are the schematics available for the board? Wouldn't mind adding my own VR conditioner

It's been great to see the interest, but I'm going to have to figure out a better way of doing kits. I only have so much time I can work on the whole project and currently a large chunk of that is being taken up by putting together kits. Not that I have a problem doing it as it helps expand the project, but it's not the best use of the time.

As for the schematics, definitely they're available
https://raw.githubusercontent.com/noisy ... ematic.png

The VR conditioner socket is a DIP8, with the expected pinouts shown on the above schematic.

For what it's worth, I've just enabled backlogs for the component kits, which should help me judge the upcoming demand.

[Evanguy]

Do you know when you will have any more. Im intrested in a bare board to build myself. I would like a complete kit if you had them but if not just a board will work.