202008 changelog?

202008 changelog?#44922

By Broke4speed - Sat Aug 22, 2020 7:57 pm

- Sat Aug 22, 2020 7:57 pm #44922

I see it's available, but the usual 'new firmware' post is missing. Is there a changelog somewhere?

Re: 202008 changelog?#44923

By theonewithin - Sat Aug 22, 2020 9:20 pm

- Sat Aug 22, 2020 9:20 pm #44923

+1!

Re: 202008 changelog?#44930

By 82rage - Sat Aug 22, 2020 10:23 pm

- Sat Aug 22, 2020 10:23 pm #44930

You can read here

Attachments

IMG_20200823_102045.jpg (678.32 KiB) Viewed 5417 times

Re: 202008 changelog?#44935

By theonewithin - Sat Aug 22, 2020 11:18 pm

- Sat Aug 22, 2020 11:18 pm #44935

That's not really what is usually provided though...

Where is the detail usually posted?

Re: 202008 changelog?#44938

By Broke4speed - Sun Aug 23, 2020 3:18 am

- Sun Aug 23, 2020 3:18 am #44938

82rage wrote: ↑Sat Aug 22, 2020 10:23 pm You can read here

That's what I was after, thanks

.

Re: 202008 changelog?#44940

By noisymime - Sun Aug 23, 2020 6:00 am

- Sun Aug 23, 2020 6:00 am #44940

I'm getting there guys, just been jumping from one thing to the next lately. The proper announcement will come out later today with a few missing details added to the Github release page as well.

Re: 202008 changelog?#44991

By criscecconello - Mon Aug 24, 2020 11:51 pm

- Mon Aug 24, 2020 11:51 pm #44991

Hi Guys,

I use the full sequential, 4 cylinders, injector and spark, when I uploaded the new firmware the ignition 3 and ignition 4 stopped, when I returned to the previous firmware, 202005, the system return to work, I don´t know if I do some mistake or have some problems in code. I use Teensy 3.5.

Thanks

Re: 202008 changelog?#44993

By pazi88 - Tue Aug 25, 2020 5:02 am

- Tue Aug 25, 2020 5:02 am #44993

Check programmable outputs, WMI feature and VSS input that there isn't anything there preventing those outputs from working.

http://www.youtube.com/pazi88

Re: 202008 changelog?#44998

By theonewithin - Tue Aug 25, 2020 8:27 am

- Tue Aug 25, 2020 8:27 am #44998

You are not the first to have an issue on the Teensy.

I would say wait for now before updating as Josh hasn't validated everything on the Teensy as yet...

Re: 202008 changelog?#45007

By criscecconello - Tue Aug 25, 2020 9:32 pm

- Tue Aug 25, 2020 9:32 pm #45007

Hi,

Today I remembered to do enable test output.

I tested before the code 202005 and all ignition worked.

After I repeat the test with new firmware and the problem persists, only ignition 1 and 2 works, ignition 3 and 4 are off all time.

Thanks