About me. My son and I have done quite a bit with cars and Arduino's over the last 8 or so years. Typical kind of things, ipod to car integrations, cam and crank pulse simulators, EEPROM chip readers etc. But most of our time was spent with CAN bus. If there is any help that I could do there let me know.
Anyway my question, and sorry if I'm asking in the wrong place, is in regards to A/C request and control. My brother is using a speeduino on his Miata. And he asked if I could look at some issues he was having with triggering the A/C and getting the idle up to all happen at the right times etc. It appears to me a small A/C controller as part of the speeduino code would work well. I found some code posted sometime in the looked to be an A/C control section but I don't see anything in the released code (perhaps it was just suggested code). Before I go trying to add in some custom code for him thought I'd ask if I'm missing something in regards to the best way to do A/C control.
Thanks for any tips you can provide.