Any strange behaviour, crashing issues etc, post them here! Problems compiling the firmware should go in the General support section rather than here
By Black Knight
#42768
It has been 5 days since I made the rom bios change.

I have had no interrupts at all. None.

So there is a strange conflict with USB 5 volts and the Speeduino 5v supplied to the the mega.
Way beyond my understanding but I did find a fix.


Hope it helps.


Black Knight
By Black Knight
#42936
As I am new to all the computer tech stuff like ROM BIOS changes I found another fault here.

It has nothing to do with interrupt issues but fits in here well enough.

I also had some issue with the computer connecting with the mega board with TS program start up.

It turns out in the rom bios there is an option to set up for USB 2 or 3 or auto for both USB 3 and 4.

I had to set mine to auto and now it connects every time I start up TS.

It would start up most times if I had the mega board plugged in before I booted the computer.

Now it will connect to the mega board every time.


Hope this help someone.

Black Knight
  • 1
  • 11
  • 12
  • 13
  • 14
  • 15

I must have misunderstood what "after few[…]

I've been away from playing cars for a few weeks, […]

I uploaded logs and last tune and dyno plots look[…]

Hi, I am trying to assign Signed values to the x-a[…]

Still can't find what you're looking for?